Comparison Photos

***This thread on the Statuesque Miniatures Facebook page shows lots of great conversions by customers using the four Statuesque Miniatures female heads sizes.***

****Please note, the Heroic Scale Female Heads LARGE range was previously known as Heroic Scale Female Heads, while the Heroic Scale Female Heads SMALL range was previously known as Heroic Scale Female Heads Narrow.****

Head Comparisons and Test Conversions


L-R: Statuesque Fine Scale, Statuesque Pulp Scale, Statuesque Heroic Scale LARGE.
Since this photo was taken Heroic Scale SMALL has been added to the range. See below:


SMA301 Heroic Scale Female Heads LARGE (left) and SMA351 Heroic Scale Female Heads SMALL.


L-R: Statuesque Heroic Scale LARGE, Games Workshop Sternguard, Heroic Scale LARGE, GW Cadian, Heroic Scale LARGE, GW Tempestus Scion, Heroic Scale SMALL, GW Sister of Silence, Heroic Scale SMALL, Heroic Scale SMALL.


L-R: Statuesque Resistance Cracking Hairdo, Statuesque Fine-Scale, Statuesque Resistance Berets


Heroic Scale Female Heads XL - Techno Roiders heads on Games Workshop plastic figures.


Heroic Scale Female Heads XL - Techno Roiders heads on Games Workshop plastic figures.


Heroic Scale Female Heads LARGE used on Games Workshop plastic figures.


Heroic Scale Female Heads SMALL used on Games Workshop plastic figures.


Heroic Scale Female Heads LARGE - Angry Bobs on Dreamforge Valkir figures.


Heroic Scale Female Heads SMALL - Angry Bobs on Games Workshop Sisters of Silence.


Heroic Scale Female Heads SMALL used on Games Workshop plastic figures.


Heroic Scale Female Heads SMALL used on Games Workshop plastic figures.


Heroic Scale Female Head SMALL used on Games Workshop plastic figure.


Fine Scale Female Heads on (L-R) Red Box Games, Infinity and Hasslefree Miniatures figures.


Pulp Scale Female Heads on (L-R) Heresy Miniatures, Statuesque/Pulp Alley, Hasslefree Miniatures and Copplestone Castings figures.


Fine Scale Female Heads (three on left) and Pulp Scale Female Heads (three on right) on Perry Miniatures plastic Foot Knights.


Heroic Scale Female Heads SMALL on Frostgrave plastic Soldiers.


Pulp Scale Female Heads on Frostgrave plastic Soldiers.


Heroic Scale Female Heads SMALL on Frostgrave plastic Cultists.


Pulp Scale Female Heads on Frostgrave plastic Cultists.


Heroic Scale Female Heads SMALL on Fireforge plastic Foot Sergeants.


Heroic Scale Female Heads SMALL on Bolt Action plastic Russians.



Other manufacturers' figures used for comparison purposes only.

30 comments:

  1. just curious if you would know what size would best fit the female arcadians from Victoria miniatures?

    ReplyDelete
    Replies
    1. I'm afraid I don't have any Victoria figures to say. I have seen the Heroic heads on those figure and they perhaps looked a bit over-sized for the bodies (the heads are designed for larger plastics after all) and I'm not sure if the Pulp Scale heads would be too small. Sorry I can't be or more help.

      Delete
  2. can you do a comparison between your fine heads next to Prodos AvP marines please? Pref the ones with the helmets. Ta

    ReplyDelete
    Replies
    1. I'm afraid I do not have any Prodos figures, though I have seen conversions using both the Pulp and Fine scale heads on AvP marine bodies.

      Delete
  3. Thanks for taking the time to make this! The scale comparisons are extremely helpful!

    ReplyDelete
  4. hi there,

    I was wondering if your PULP weapon pack would actually fit GW miniatures?

    thanks in advance and have a great day!

    Max

    ReplyDelete
    Replies
    1. The hands are fairly close to those on Cadian plastics. However, the guns are smaller, but if you accept lasguns and laspistols are huge that shouldn't be a problem.

      Delete
  5. First of all amazing job putting this togeather! One question, I was thinking of adding these to my Cadian squads and use the SMA305 Heroic Scale Female Heads - Bald and add the spare helmet that you get in the standard GW to them since everyone else has helmets;) have you tested if those heads fit into the helmet and look good or should I pick another size?

    ReplyDelete
  6. Thanks, Klas. Judging the heads alongside the helmets but not having tried it myself, the bald Heroic Scale heads should fit in the Cadian helmets - assuming you hollow out the helmets enough with some kind of Dremel-type tool. I suppose using Heroic Scale Narrow bald heads might be easier as you'd have to hollow out a bit less. I hope that helps!

    ReplyDelete
    Replies
    1. Thanks for quick reply and once again really appreciate that you are doing this, keep up the good work!

      Delete
  7. do the heroic scale heads work on the puppetwar striker bodies?

    ReplyDelete
    Replies
    1. Hi, sorry for the late reply. I'm afraid I don't have any Pupperwar figures so I really don't know. If the figures work with Games Workshop heads, then I'd guess the Heroic Scale heads could work too.

      Delete
  8. can you advise what scale heads would work best for the new Necromunda Escher gang?

    ReplyDelete
    Replies
    1. Hi, sorry for the late reply. I've tested out various sizes and taken quick photos that you can see on the Statuesque Facebook page here: https://www.facebook.com/statuesqueminiatures/posts/10156197648032384 I thought the Pulp Scale heads worked best.

      I need to get proper photos taken and will add them to this page when I can.

      Delete
  9. I really like these :)

    It might be a good idea to remake the comparison for Infinity, as at some point they switched from hand-sculpted to 3d-printed masters, and in the process their scale increased and all the new models from 2-3 years until now are bigger, gut feeling says that they should fit your Pulp scale.

    ReplyDelete
  10. Hi - will the heroic heads work with DUST-1947 figures (scale 1:48) ?

    ReplyDelete
    Replies
    1. I've seen customers used Heroic Scale on male Dust figures and Pulp Scale on the female figures. There are some in the Facebook thread linked at the top of this page.

      Delete
  11. Do you have any thoughts regarding your heads on FFG's Star Wars Legion minis?

    ReplyDelete
    Replies
    1. Hi Luke. Customers have used Heroic Scale heads on Star Wars Legion figures to good effect. Check out Agis Neugebauer's conversions here:http://www.agisn.de/html/legion.html

      Delete
  12. I just got my order of female heads and they're AMAZING! Thank you for the outstanding sculpts and flawless casts.

    ReplyDelete
  13. What size of female heads would you recommend for use on GW dwarf minis?

    ReplyDelete
  14. Hi there! Im looking for female heads for a conversion for the new Marvel Crisis Protocol miniature game. Miniature scale is 40 mm. Do you think heroic narrow would be ok or perhaps too small?

    ReplyDelete
    Replies
    1. From looking at comparison photos of the Marvel figures, I doubt you'd need anything bigger than Heroic Scale Narrow but it's hard to say. They're very different proportions to GW figures, so even though they're taller, the heads aren't necessarily bigger.

      Delete
  15. These look wicked. What would you recommend for a Stormcast Eternals conversion?

    ReplyDelete
  16. The shipping was super quick, and the "Heroic Scale Female Heads Large" helped me to make an awesome Blood Bowl Team, that is a bit more diverse than the out of the Box Set.

    ReplyDelete
  17. Hello! I can't decide about the actual size I need. Which one is the closest to the newGames Workshop Adepta Sororitas range?

    Cheers!

    ReplyDelete
    Replies
    1. Hi Jose. They're a larger than the Adepta Sororitas heads, with different proportions, but the Statuesque heads that I feel work best on those bodies are the Heroic Scale SMALL heads.

      Delete
    2. Hi there, Andrew. Thanks for the advice, I will give them a try :)

      Delete
  18. Hello!
    I wanted to buy the fine scale (regular) female heads for my Perry medieval miniatures but I don't see them in the store. Are they still available? I just saw the comparison photo and they just fit perfectly.

    Thanks for your time! Kind regards,
    Andreu

    ReplyDelete
  19. Any idea what scale would be good to replace tau heads on a battlesuit pilot ? (specifically the Ghost Keel) ? i am trying for a 'no limts in the greater good' home brew thing.

    ReplyDelete